RC Cars, Collectible Model Train
Sets, Collectible Model Cars & More
How to Cut your Craft in Quilting
When you start your quilt, you will need
patterns, such as rectangles, squares, cut strips, and so on.
Once you gather your patterns, you will need cutting tips to
complete your quilt.
Cutting the strips:
When you begin to cut your strips, you will need to align your
fabric, mark, etc. Use a ruler to decide the width and start
cutting once you reach your desired dimensions. For instance, if
you want to create a 2-inch strip, locate the mark on your ruler
and place the area side by side of your edges that square.
Once you finish cut the strips. You will need a rotary cutter to
complete your mission. Your layers figures are based on the
strips you cut. You can also mark and then cut your strips so
that you have separate squares. You perform the same actions
when making rectangles. Squares are also cut in the same
fashion. However, you will need to create two squares per cut.
You will need two rectangles also per cut, since the fabric is
thick. For instance, if you were to cut 3 ½ inches of fabric
strips x 44 inches, you will need to cut 6 ½ inches x 3 ½ x 6 ½
inches to form your rectangles.
When you start to cut your triangles, start at a 45-degree
angle. Cut the squares succeeding to cut the squares slantwise,
or diagonally and in half. When cutting your triangles, keep in
mind that the longer sides require seams that allow room to
finish. You need about a 2-inch finish line per triangle, or
side. On three sides however of your triangle, you will need to
leave a width of 2 ½ inches to complete your task.
If you are not use to measuring materials, purchase a
transparent, heavy-duty ruler and create templates to use as
your guide.
Use your templates, aligning it on the material, and lay it in
line down the edges at the three sides and use your ruler in a
straight line and over your template. Once you have your
template in position, you can start cutting across the width to
meet your template.
Once you have cut your patterns, you will need to organize and
then cut your pieces. Once you cut, your pieces try to organize
them so that they do not get lost. You can categorize the pieces
and stack them neatly in a desired area near your sewing
station.
After you organize your pieces, you want to learn how to press
properly. You will need to iron your fabric to prepare it, yet
you want to learn pressing techniques, rather than strict
ironing. You merely press and lift, relocate, press, release,
and relocate, repeating the same cycle to press your fabric.
You will need to press your fabric as you move through the
stitching stage also. You will also need to press the allowances
at the seams. Head in the same direction at what time you are
pressing the seams. To make your fabric durable and sturdier,
press the seams to one of your sides.
Learn more about pressing, and irons to complete your quilt.
Pressing is important. Once you have your patterns together,
pressing down, etc, you can move onto piercing a perfect quilt.
Of course, if you are not in the mood for hand piercing, you can
pick up a few tips in stitching seams and allowances, as well as
appliqué. Appliqué is the process of fabric pieces sewn onto
fabric, sewing shaped parts of fabric onto an underpinning to
form a pattern or design.